Product Page: DIR-635 Hardware Version: A1   Firmware Version: 1.07 
Setup Advanced Tools Status Support

QoS Engine

Use this section to configure D-Link's QoS Engine powered by StreamEngine™ Technology. This QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web. For best performance, use the Automatic Classification option to automatically set the priority for your applications.

QoS Engine Setup

Measured Uplink Speed :    kbps
Manual Uplink Speed :  kbps   <<  
Connection Type :
Detected xDSL Or Other Frame Relay Network :  

10 -- QoS Engine Rules

Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Name
 Priority
(1..255) 		Protocol
<<
Source IP Range
to 		Source Port Range
to
Destination IP Range
to 		Destination Port Range
to
Helpful Hints...

If the Measured Uplink Speed is known to be incorrect (that is, it produces suboptimal performance), disable Automatic Uplink Speed and enter the Manual Uplink Speed. Some experimentation and performance measurement may be required to converge on the optimal value.

More...