Configuration


Status

System:
This setup page allows you to configure general system settings of the print server.

Device Name: You may enter a Device Name if you wish.

System Contact: This option allows you to input the contact name of the person who is in charge of this device.

System Location: This option allows you to input the location of the print server in the office LAN.

Password: Input a password with 3-8 characters for the print server. (Optional)

Re-type Password: Retype the password, if you have input one.




Printer
This setup page allows you to enable or disable the bi-directional function of the printer port.

Bi-directional: Select Disable or select Auto Detect to enable this function.




Wireless

Wireless
This setup page allows you to configure wireless settings of the print server. By default, this print server acts as a wireless station in the Infrastructure mode.

Mode: Infrastructure, 802.11b Ad-Hoc or Ad-hoc (peer to peer).

Select SSID or Manually Enter SSID Below: You can use Site Survey to help you assign a SSID or input in manually.

Channel: Specify a Channel number that matches your environment.

Data Transmit Rates: Choose the transmit rate of your wireless print server.

(below is advanced wireless web)

Beacon Interval: Input the interval of Beacons (default is 100ms).

Preamble: Choose short or long preamble. (default is long).

Authentication Type: For added security on the wireless network, when enabling Encryption, the Authentication type can also be selected. If Shared Key is selected, the Access Point will only be seen by the wireless clients that share the same WEP key and are listed in the MAC Address Filter List. If Open System is chosen, only the wireless clients with the same WEP key will be able to communicate on the wireless network, but the Access Point will be visible to all devices on the network regardless of WEP keys. The default value for authentication is set to Auto, which adjusts to the Authentication mode of the wireless client automatically.

(above is advanced wireless web)

USE WEP: You choose from Disabled, 64-bit, or 128-bit.

Key Format: Alphanumeric or Hexadecimal. An alphanumeric character is 'a' through 'z', 'A' through 'Z', and '0' through '9'. A hexadecimal digit is '0' through '9' and 'A' through 'F'.

WEP key: Input your WEP key in this field.
Depending on the key format you select:
1. For 64-bit(sometimes called 40-bit) WEP encryption, enter the key which contains 5 alphanumeric characters or 10 hexadecimal digital. For example: AbZ123(alphanumeric format) or ABCDEF12345 (hexadecimal format).
2. For 128-bit WEP encryption, enter the key which contains 13 alphanumeric characters or 26 hexadecimal digits.




Network

TCP/IP
This setup page allows you to configure the TCP/IP settings of the print server.

Obtain TCP/IP settings automatically (use DHCP/BOOTP): If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server.

Use the following TCP/IP settings: Or you can choose to enter TCP/IP settings manually.

IP Address: This option allows you to input an IP address for the print server. The IP address must meet the IP addressing requirements of the network segment. Default IP is 192.168.0.10.

Subnet Mask: This option allows you to input a subnet mask for the print server, it must meet the requirements of the network segment. Default subnet mask is 255.255.255.0.

Gateway: This option allows you to input an IP address for the gateway.




Netware
This setup page allows you to configure the NetWare function of the print server.

Print Server Name: This option allows you to input a print server name that has been configured by the PSAdmin utility or PCOMSOLE program.

Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues.

Logon Password: Input an encrypted password for the print server in order to login to the NetWare server.

Use NDS Mode: Enable NDS Mode, if you want to setup an NDS environment.

Name of the NDS Tree: Enter the Tree Name of Netware.

Name of the NDS Context: Enter the context name in the Context box.

Use Bindery Mode: Enable Bindery Mode, if you want to setup a Bindery environment.

Name of the File Server: Enter a file server name.




AppleTalk
This setup page allows you to configure the AppleTalk settings of the print server.

Zone Name: Type a name for the AppleTalk Zone to which the print server will belong, or leave it in default(recommended). The print server will search and automatically link to the default zone. If no zone exists, the print server displays the zone name as an asterisk (*) in AppleTalk Status.

Port Name: In this option, type a name for identification purposes or just leave it at default (recommended).


Note: The default print server Chooser name is shown as follows: 
<ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the MAC Address. (e.g. ATALK_PS-40EEED-1). You may change <ATALK_PS> to a name for identification purposes; the print server will append the last six digits of the MAC Address.

Printer Type: The default setting is LaserWriter (recommended).

Data Format: Choose from ASCII, TBCP and BCP.




Management

SNMP
This setup page allows you to configure the SNMP settings of the print server.

Support HP WebJetAdmin: Disable or Enable the Support of HP WebJetAdmin.

SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access rights.

SNMP Traps: Sends Authentication Failure message to the network administrator, when the community name within a SNMP request is not correct.




SMB
This setup page allows you to configure the printer sharing settings.

Workgroup: Enter the name of the workgroup you want to join in.

Printer: Input the name of your print server which can be seen via your LAN.