Product Page: WBR-2310 Hardware Version: A1   Firmware Version: 1.04
Setup Advanced Tools Status Support

Network Settings :

Use this section to configure the internal network settings of your router and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Router Settings :

Use this section to configure the internal network settings of your router. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Router IP Address :   
Default Subnet Mask :   
Local Domain Name :  
Enable DNS Relay :  

DHCP Server Settings :

Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network.

Enable DHCP Server :
 
DHCP IP Address Range :
   to (addresses within the LAN subnet)
DHCP Lease Time :
  (minutes)

Add DHCP Reservation :

Enable :
 
Computer Name :
 
IP Address :
 192 . 168 . 0 .  
MAC Address :
  - - - - -
 

DHCP Reservations List :

Enable Computer Name IP Address MAC Address

Dynamic DHCP Client List :

Host Name IP Address MAC Address Expired Time
end_user192.168.0.10000-05-5d-ce-b3-8dApr/01/2002 04:45:10
Helpful Hints..

DHCP Server:
If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, uncheck Enable DHCP Server to disable this feature.

DHCP Reservation:
In order to ensure that devices on your network are always assigned the same IP address, add a DHCP Reservation for each device.

Copyright 2004-2005 D-Link Systems, Inc.