Product Page: WBR-2310 Hardware Version: A1   Firmware Version: 1.04
Setup Advanced Tools Status Support

Internet Connection

Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond. If you are unsure of your connection method, please contact your Internet Service Provider.

Note: If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.

Access Point Mode :

Use this to disable NAT on the router and turn it into an Access Point.
Enable Access Point Mode

Internet Connection Type :

Choose the mode to be used by the router to connect to the Internet.

My Internet Connection is :  

Dynamic IP (DHCP) Internet Connection Type :

Use this Internet connection type if your Internet Service Provider (ISP) didn't provide you with IP Address information and/or a username and password.

Host Name :  
MAC Address :   - - - - - (optional)   
Primary DNS Address :
  
Secondary DNS Address :
   (optional)
MTU :  
Helpful Hints..

Internet Connection:
When configuring the router to access the Internet, be sure to choose the correct Internet Connection Type from the drop down menu. If you are unsure of which option to choose, please contact your Internet Service Provider (ISP).

Support:
If you are having trouble accessing the Internet through the router, double check any settings you have entered on this page and verify them with your ISP if needed.


Copyright © 2004-2005 D-Link Systems, Inc.