1. Q:
    2. How do I set up the Quick VPN feature on my router?
    1. A:
    2. Step 1: Log into your router - How do I log into my router? 


      Step 2: Click Features > Quick VPN.



      Step 3: Configure the VPN service: 


      - L2TP over IPsec - ENABLED

      - Username - <Enter a username for the VPN> (You will need this later to connect) 

      - Password - <Enter a password for the VPN> (You will need this later to connect) 

      - PSK - <Enter a Preshared Key for the VPN> (You will need this later to connect) 


      Click Save.


      Router Setup is complete. 



      Step 4: From the control panel, click Network and Internet



      Step 5: Click Network and Sharing Center.



      Step 6: Click Set up a new connection or network.



      Step 7: Click Connect to a workplace.



      Step 8: Click Use my Internet connection (VPN).



      Step 9: Configure the VPN IP address and Name: 


      - Internet Address - Enter in the Public IP address of your router. This can be found on the home page of your router configuration.

      - Destination Name - Enter a name for the VPN Connection 


      Put a check next to Don''t connect now, just set it up so I can connect later.



      Step 10: Enter your username and password for the VPN (created earlier). Click Create.



      Step 11:  Click Close.



      Step 12: From the Network and Sharing Center, select Change Adapter Settings from the left panel.



      Step 13: Right-click on your new VPN connection and select Properties.



      Step 14: Click on the Security Tab, select Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec) and click Advanced Settings.



      Step 15: Select Use preshared key for authentication and enter your security key (created earlier). Click OK to apply all settings.



      Step 16: Right-click on your new VPN Connection and click Connect.



      Step 17: If required, enter your VPN username and password (created earlier). Click Connect.




      You should now be connected to your router''s VPN.



      Setup is Complete. 



Did you find this article useful? Yes No