1. Q:
    2. How do I setup and Install my DSL-520B modem?
    1. A:
    2. Step 1: Power on the modem.


      Step 2: Connect an RJ-11 cable (telephone cable) between the wall phone jack and the DSL port on the back of the modem. 


      Step 3: Connect an Ethernet cable from your computer/laptop to the LAN port on the back of the modem. This is for setup purposes. After setup you can connect the DSL-520B to a switch.



      Step 4: Open your web browser and enter the IP address of the DSL-520B modem into the address bar. The default IP is You should be taken to the login page. By default, the username and password is admin.



      Step 5: Enable DSL Auto-Connect and click Next




      Step 6: Input your PPPoE username and password (supplied by your ISP) and click Next.


      Note: If you are unsure of the username and password you will need to contact your Internet Service Provider. Also, if your Internet Service Provider requires a PPPoE service name then input the name, otherwise leave it blank. 



      Step 7: Click Next.



      Step 8: Click Save/Reboot





      If you do not get Internet connectivity, you may need to enter the VPI/VCI settings manually. Click here for a list of ISP and their settings.

Did you find this article useful? Yes No