1. Q:
    2. How do I configure my DSL-520B modem in bridge mode?
    1. A:
    2. NOTE: The DSL-520B is a modem/router. If you are going to connect the DSL-520B into another router we recommend to configure the DSL-520B in bridge mode.

       

      Step 1: Power on the modem.

       

      Step 2: Connect an RJ-11 cable (telephone cable) between the wall phone jack and the DSL port on the back of the modem.

       

      Step 3: Connect an Ethernet cable from your computer/laptop to the LAN port on the back of the modem.

       

       

      Step 4: Open your web browser and enter the IP address of the DSL-520B modem into the address bar. The default IP is 192.168.1.1. You should be taken to a login page. By default, the username and password are admin. Click Log In.

       

       

      Step 5: Click on Advanced Setup.

       

       

      Step 6: Click on WAN and then click Add.

       

       

      Step 7: Click Next.

       

       

      Step 8: Select Bridging and click Next.

       

       

      Step 9: Click Next.

       

       

      Step 10: Click Save.

       

       

      Step 11: Click Save/Reboot.

       

       

       

      Setup Complete 






Did you find this article useful? Yes No