Select your Firmware (GUI version):
Previous Firmware v1.0.xx GUI
Step 1: Open your web browser and in the address bar, type in http://192.168.10.1. The username is ''admin'' and by default the password is ''admin'' Click login.
Step 2: Click on the Advanced tab. On the left side click on the Users button than click on Users
Step 3: Select admin user and click on Edit button
Step 4: Select Check to Edit Password. Enter you new password and retype to confirm your new password.
Step 5: Click [Save Settings] to complete the process.
New Firmware Version v2.x.x/3.x.x GUI
Step 1: Open your web browser and in the address bar, type in http://192.168.10.1. The username is ''admin'' and by default the password is ''admin'' Click login.
Step 2: Click on the Security tab>Authentication > Select Internal User Database.
Step 3: Select Users.
Step 4: Right click on Admin>Select Edit.
Step 5: Enable Edit Password.
Step 6: Enter the Current Logged In Administrator Password. Enter your new password and retype to confirm your new
password (Password is case-sensative). Click on Save.
Note: We recommend to write the password and store it in a safe place. In case you forget the password the
unit will need to be factory reset to recover admin access to the unit.
Step 7: After saving the setting you will receive the message below (Password Changed. Please log in), now you are able to log in to the unit with the new password.
